New 10pcs High Brightness 5V LED Color Lamp Bead Light Board Bulb 5730 SMD 1.5W Red Purple Yellow Green Blue Warm White Light


Introduction:

Lamp Bead Type: 5730

Power: 1.5 (W)

CRI: 90

Chip size: 31MM*15MM

Wire material: Gold wire

Support material: copper

Luminous Angle: 120°

Emitting Color: Red/Green/Purple/Yellow/Blue/warm/white light

line length: 20CM

The product canchoose the welded line or no welded line.

The package contains:

10pcs* LED 5730 SMD Color Lamp Bead (Color optional)

NOTE:

Due to the difference between different monitors, the picture may not reflect the actual color of the item.

The detail size is compared with your size, please allow 1-3cm error due to manual measurement.

Thank you for your understanding.

,

,

High Power LED Chip 10W COB Light Beads 10 W Watt RGB Red Green Blue SMD Diode For Stage Light Floodlight Spotlight Lawn Bulb 

,

1000PCS x 257 White Blue Red Jade Green Diffused Lens 2*5*7mm Square Long Leg Superbright LED for Light Cube Light Beads,

Product Details

Name: 80mm LED filament

Bracket: FPC

Serial and parallel: 40 parallel and 1 string

Voltage: DC3V

Current: ≤100mA

Lumens: 300LM (@15mA)

Color: Warm White 2200K

CRI: >80

,

High power LED lenses,1 W,3 W,5 W,20 mm PMMA lenses for with bracket, White 5, 8,15,25,30,45, 60, 90,120 degrees light beads

THANK YOU!

,

Description:

• Color: WARM WHITE
• Wave Length: 
• Size: 3.2*1.6mm
• Brightness:   250-320mcd
• Voltage: 2.8-2.9V
• Current: 20mA
• Light Angle: 120 degree
• Standard Package: 3000pcs/reel ( T&R)
• Lens Color: water clear

,

1—Does the LED flexible filament need a heat sink?

Answer: The LED filament does not need a radiator, and the LED uses current ≤10mA, and does not require heat dissipation.

2—Can the LED flexible filament be lighted up with 18650 battery DC3.7V?

Answer: No, our LED filament voltage is standard DC3V.

If you use DC3.7V, the voltage is too high and the filament temperature is very high, which will burn out the lamp beads.

3—Where is the LED flexible filament used?

Answer: Generally used in light bulbs, DIY hand-made toys, DIY decoration design.

4—Can the flexible LED filament be 90 degrees vertical?

Answer: No. Maximum bending angle of LED filament≥30°

5—Can the flexible LED filament be freely cut to length?

Answer: No. If it is cut, it will not light up.

6—Can the length of the LED flexible filament be customized according to customer requirements?

Answer: No. All are fixed length, unless customized in large quantities (≥10,000 pieces)

7—Can LED flexible filament work in water?

Answer: No. But you can DIY by yourself and put a transparent plastic tube on the outside of the LED filament, and it can work in water.

8—What is the CRI of the LED flexible filament?

Answer: CRI≥80

9.—How to light up the LED flexible filament?

Answer: Two AA batteries connected in series = 3V can light up the filament, or use 3V button battery CR2032.

Specification

Note: The product does not include batteries

Length=80mm

CRI：≥80

Voltage : DC3V

80mm actual length = 70mm+5mm positive interface +5mm negative interface

,

,

Features:

1. Wireless Bluetooth controller. APP-controlled Led light strips can be controlled by smartphones. No setup or network management required. The app can be downloaded by scanning the QR codes, providing a smart lifestyle.
Sync with music: No hub required, music sensor activated, suitable for led under cabinet lighting, TV led backlight or led Christmas lights.
2. Built-in high-sensitivity microphone, which can automatically adjust the spectrum and color according to the ambient sound, and the light follows the music and microphone. Allows you to change 16 million different colors of lights. Each color is dimmable.
3. Powered by a 5V USB port, so they can be connected to devices such as power banks, computers, desktops, tablets, laptops or mobile phone chargers/adapters (5V), especially suitable for indoor use.
4. Easy installation, use self-contained tape, just tear off the tape to stick or hang it in any position you like. If you want to remove the non-destructive tape, it will not tear anything in the future.

Specifications:
Control Mode: Bluetooth
Controller: Bluetooth Controller
Light Strip Length: 1/2/3/4/5m (Optional)
LED Type: 5050 SMD
LED Quantity: 30
Operating Voltage: 5V USB
Light Color: RGB
Strip Base Color: Black
Lifespan: About 50000 Hours

Package Included:
1 x Flexible Strip Light
1 x USB Cable with Bluetooth Controller

,

Model: CSP50W-AC220V-4046

Power: 50W

Voltage: AC220V

Color: Warm White 2400-2600K/Cold White 7000-8000K

Lumen: 4500-5000lm

Display index: Ra70

Chip crystal size: 0705

Series parallel circuit mode: 2 parallel 72 series

Number of lamp beads: 144pcs

Material: Aluminum

Thickness: 1.5mm

Appearance size: 40 * 60mm (1.57 * 2.36inch)

Luminous surface size: 25 * 25mm (0.98 * 0.98inch)

Thermal conductivity: aluminum plate 2W/M · K

Application occasions: floodlights/spotlights

Usage temperature: A radiator is required, and the temperature cannot exceed 65 degrees.

Welding conditions: The temperature of the electric soldering iron is 350 degrees Celsius, and the welding time is ≤ 2 seconds.

,

Our products are updating, if you need any other kind of LEDs, you can leave us a message.

If you have any question about your order, please contact us before open a dispute! Thank you very much!!

Specification:

Part number: 5mm bicolor / common cathode / Flat

Color: RED+ YELLOW GREEN

Voltage: 1.8-2.0v

Current: 20mA

Len color: diffused

Size: 5mm / FLAT HEAD

,

,

[xlmodel]-[photo]-[0000]

,

,